Every piece of furniture from Lumber2Love is handcrafted with precision, quality, and longevity in mind. While we build each table, desk, and custom furniture piece to last for generations, proper assembly is essential to ensure maximum stability, safety, and performance.
Whether you’ve purchased a custom dining table, conference table, or one of our signature designs, following the correct assembly process will help protect your investment and allow you to enjoy your handcrafted furniture for years to come.
This guide provides general assembly recommendations for several of our most popular furniture collections, along with tips to make the installation process smooth and stress-free.
Before You Begin Assembly
Before assembling your Lumber2Love furniture, choose a spacious work area with enough room to safely handle the tabletop and base components.
We recommend placing a moving blanket, rug, or other soft protective surface underneath the tabletop during assembly. This helps prevent scratches while protecting both the furniture and your flooring.
Before tightening any hardware, confirm that all components are correctly aligned. In nearly every Lumber2Love design, bolts should first be loosely installed before final tightening.
Steel Spider Base Assembly
The Steel Spider Base is engineered to provide exceptional strength while maintaining a clean, modern appearance.
Begin by placing the tabletop upside down on a protected surface and positioning the four steel legs upside down on the bottom of the table.
Next, install the steel center support that connects all four legs. Each leg fits into the center support, and the bolts should be threaded only loosely during this stage. This allows enough flexibility to align everything correctly.
Once the center support is connected, align each base plate with the threaded inserts underneath the tabletop. Install every mounting bolt loosely before tightening anything completely.
After confirming the base is properly aligned, tighten the center support bolts first, followed by the mounting bolts securing the base to the tabletop.
This sequence ensures the base remains square and properly balanced.
Dakota Extension Table Assembly
The Dakota Extension Table features a carefully engineered extension system that provides strength while allowing additional seating when needed.
Start by standing both table legs upright and positioning the metal center beam between them. Align all mounting holes on both ends before partially installing each screw.
After the center beam is connected, carefully flip the base over to locate the numbered labels attached to the leg plates.
Each numbered leg corresponds with matching numbered rail supports. Connect the matching pieces using the supplied threaded bolts, tightening them only after confirming proper alignment.
Once the base is complete, return it to its upright position and carefully position the tabletop so the integrated slides rest on the mounting plates.
Align the support plates with the threaded inserts beneath the tabletop and loosely install every bolt before completing final tightening.
If your Dakota table includes a hidden leaf extension, additional numbered labels and instructions are provided to guide the installation of the extension components.
Marzolf Round Table Assembly
The Marzolf Round Table is designed for quick installation using precision alignment ribs that simplify assembly.
Begin by placing the tabletop upside down on a protected surface before positioning the base on the underside of the table.
You’ll notice alignment ribs marked with corresponding numbers on both the tabletop and base. Match each numbered section before installing the attachment screws.
Because the alignment ribs provide slight flexibility, minor adjustments may be necessary while lining up the pre-drilled holes.
Once all hardware is securely tightened, carefully rotate the completed table into its upright position.
Heritage and Heritage Extension Table Assembly
The Heritage Collection combines timeless craftsmanship with a sturdy support system that assembles efficiently.
Begin by attaching the upper structure and lower center beam to the base. Match the numbered markings on each component before loosely tightening the supplied hardware.
Once the base has been assembled, carefully position the tabletop onto the base and align the threaded inserts underneath the table with the mounting holes on the base.
Install each bolt before performing the final tightening sequence.
For Heritage Extension Tables, loosen the set screws located on the extension bars using the provided Allen wrench. Extend the rails until the extension leaf fits into position.
After aligning the leaf with the extension bars, tighten the set screws to secure everything firmly in place.
The Jo Dining Table Assembly
The Jo Dining Table uses a durable beam system that creates exceptional stability while maintaining a clean, handcrafted appearance.
Start by keeping both table legs upright.
Attach the center beams by inserting the supplied bolts through the top of each leg and into the center beams. Each side uses bolts and washers to create a secure connection.
After both center beams are attached, place the tabletop onto the assembled base or carefully flip the base onto the underside of the tabletop if working from the floor.
Align the mounting holes in each leg with the threaded inserts beneath the tabletop before installing the remaining bolts and washers.
Once every bolt has been started, complete the tightening process evenly across the entire base.
Always Tighten Hardware Gradually
One of the most common mistakes during furniture assembly is fully tightening individual bolts too early.
Instead, install every bolt loosely first. This allows all components to shift slightly into perfect alignment before final tightening.
Working this way reduces stress on the frame, ensures better stability, and creates a stronger finished assembly.
Need Additional Assembly Help?
Some custom furniture designs include unique construction details depending on size, materials, or custom features.
For additional assistance, Lumber2Love provides detailed assembly videos that walk you through the process step by step.
You can watch our complete collection of installation guides by visiting the Furniture Assembly Videos page on the Lumber2Love website.
Our visual tutorials are an excellent resource for customers who prefer to follow along during installation.
Tips for a Safe Furniture Assembly
Proper assembly helps protect both your furniture and your home.
Whenever possible, have two people lift and position heavy tabletops. Avoid dragging furniture across hardwood or tile floors, and always use felt pads beneath table legs once assembly is complete.
After installation, periodically inspect all hardware and retighten bolts if necessary, especially during the first few weeks as the furniture settles into its new environment.
Following these simple maintenance practices helps keep your handcrafted Lumber2Love furniture performing beautifully for years.
Why Choose Lumber2Love?
Every Lumber2Love piece is handcrafted in our Grand Rapids, Michigan workshop by skilled artisans who believe furniture should be both beautiful and built to last.
From custom dining tables and conference tables to hospitality furniture and one-of-a-kind commercial projects, every piece is created with premium materials, precision craftsmanship, and careful attention to detail.
Our goal is to make assembly straightforward so you can spend less time building and more time enjoying furniture that’s designed specifically for your space.
Frequently Asked Questions
Do all Lumber2Love furniture pieces require assembly?
Most tables require some assembly to ensure safe transportation and easier delivery. Hardware and assembly instructions are included with your order.
Should I tighten every bolt immediately?
No. Always loosely install all bolts first, verify proper alignment, and then complete the final tightening sequence.
Can I assemble my furniture by myself?
Smaller pieces may be assembled by one person, but we recommend having two people for larger dining tables, conference tables, and extension tables to safely lift and position the components.
Where can I watch Lumber2Love assembly videos?
You can find step-by-step installation videos for many of our products on the Lumber2Love Furniture Assembly Videos page
What tools are typically required?
Most assemblies require the included hardware and a standard Allen wrench. Some larger tables may benefit from an additional wrench or socket depending on the hardware provided.
What should I do if my table includes an extension leaf?
Extension tables include additional instructions and numbered labels to help guide installation. Follow the matching numbers carefully before tightening all hardware.
How often should I check assembly hardware?
We recommend checking bolts periodically, especially within the first few months of use, to ensure everything remains secure.
Can Lumber2Love help if I have assembly questions?
Absolutely. Our team is always happy to answer questions and provide guidance to ensure your furniture is assembled correctly and safely.