The Bryson Credenza
- Build time
- Approx. 8–10 weeksApprox. 14 weeks for chairs right now — policies
- Materials
- Michigan-made American hardwood
- Finish
- Hand-applied stain, catalyzed varnish — color options
- Sizing
- Table sizing guide
- Delivery
- Hand delivered nationwide — standard vs white glove
- Warranty
- Written limited warranty
Solid hardwood credenza with framed fronts and shadow lines, on black steel legs. 4ft to 8ft, 20in deep, 30 or 36in tall, in maple, white oak or walnut.
Framed door fronts with a shadow line between each bay, on black steel legs. More structure than a slab front, without becoming traditional.
Inside every credenza
Built to order
- Solid American hardwood in maple, white oak or walnut
- 4ft to 8ft long, 20 inches deep
- 30 or 36 inches tall
- Black steel legs
- One adjustable shelf per bay
- Power and data grommets available on request — message us and we will quote it with your build
Built in the same shop, the same hardwoods and the same finishes as our dining and conference tables, so a room reads as one piece rather than a collection.
Accessories
All six are specified at checkout and built in before the piece ships.
Glass top
$1,200
Quarter inch tempered glass with a smooth polished flat edge. Inset an eighth of an inch from the perimeter and set on discreet clear rubber bumpers. Longer credenzas get a two piece top for easier handling and installation.
Additional shelving
$180 each
One black oak shelf with four support pins is included as part of the standard shelving system in every bay. Additional shelves can be specified to suit your storage needs, positioned anywhere on the pin holes.
Cooler drawer
$3,000
Built in Summit COOL1D wine and beverage cooler drawer. Holds eight bottles, or four on angled shelves with cans below. Solid state cooling, so it runs silent with no vibration through the cabinet. Adjustable from 46 to 68°F.
The drawer front is built in your species with a matching grain, so it disappears into the piece. The bay is built deeper than 20 inches and needs a power outlet behind it. Available on 7ft and 8ft credenzas — the unit needs an 18 inch wide bay.
AV cutouts
$150
Rear and top panel cutouts sized for AV components and cable pass through, positioned in the bay of your choice. Compatible with all credenza sizes. Specified at time of order to suit your equipment package.
Internal drawers
$850 per bay
Each bay accepts three slide out drawers crafted in black oak. Designed to work across all credenza sizes. Drawers arrive fully assembled for quick installation, so there is nothing to build on site.
Trash drawer
$650
Pull out single compartment trash or recycling unit installed in your selected bay. Each drawer includes one 7 gallon black plastic bin. Maximum of one per bay. Ships fully assembled for quick installation.
Build time 8 to 10 weeks. Rush available — just ask. Need a size outside this range, or matching to an existing piece? Send us the wall dimensions.
How the net comes off
Living with a solid wood table
Variation in color and knots
The photos you see online are exactly that — photos. Wood can look different in person, under different lighting and in different rooms. All real wood has variation running through it, and that variation should be expected rather than treated as a fault.Tables can come with knots, which we fill with epoxy. If you want a clean top with no knots, tell us and we'll quote it that way.Humidity control
If the humidity in your home is too low, furniture can dry out and crack. Too high, and it can warp. The best environment for a Lumber2Love piece is a relative humidity of roughly 35–45%.Heat exposure
Avoid placing your furniture where a heat source points directly at it. Somewhere with decent air circulation will treat it much better over the years.Sunlight exposure
Try to keep it out of direct sun. Continual exposure to sunlight — and to fluorescent light — can change both the wood and the finish over time.Water and spills
The catalyzed varnish finish is spill resistant and handles daily life well, but it's still wise to wipe up spills promptly. Standing liquid left long enough will damage any wood surface.Cleaning
A damp cloth is genuinely all you need. Dry dusting can drag small grit across the surface and scratch the finish. If you'd rather use a polish, avoid anything with silicone, wax solvents or abrasives.How the catalyzed varnish finish looks
Want it a different size, wood or base?
Nothing in the catalog is sitting in a warehouse. Every table is cut for the person who ordered it, which means the dimensions, species, finish and base are all yours to choose.
Order a $40 sample packFour finished hardwood samples, so you can see the finish in your own room first.
Check the sizing guideHow much room a table actually needs, and how many people it seats.
Reviews
There are no reviews yet.